Advanced Remote Soldat Server Enchanter [v1.2.7] (build 14)

[urraka]

I've been testing it and it has just happened again, the same way. I connect to one server, it screws up showing the server password and it copies all the fields to the other server in that same moment. This time i was even already connected to the second server. I'm still conected to it but in the editboxes I see the data from the other server.

[KeFear]

-How many servers do you have open in ARSSE?
-What hardware/software do you have? (CPU, Operating System)
-Could you make a detailed description on your testings about this bug? When does it occur? With what circumstances?

Thanks in advance

Edit:
Could you give me your ARSSE version with full config and everything? Just remove the server passwords/rename servers, hosts, just don't delete them.

[urraka]

I have 3 servers tabs (usually only 1 connected)

Operating System: WinXP Service Pack 2
CPU: AMD Athlon 64 3000+

The circumstances are these: I start ARSSE, press connect in the first tab (meaning I don't even change the tab), and the bug happens (not every time). Every time it happens I get the same behaviour in the console. I'll just show you a log (hiding my password).

Session Start: Dom May 04 23:15:23 2008
(23:15:23) Connecting to 201.212.0.103:23074...
(23:15:23) Welcome, you are in command of the server now.
(23:15:23) List of commands available in the Soldat game Manual.
(23:15:23) Server Version: 2.6.3
(23:15:23) /friendlyfire
(23:15:23) Friendly Fire is 0
(23:15:24) /bonus
(23:15:24) Current bonus frequency is 0
(23:15:24) /vote%
(23:15:24) Voting percent is 60
(23:15:24) /respawntime
(23:15:24) Respawn time is 3 seconds
(23:15:24) /maxrespawntime
(23:15:24) Maximum Respawn time is 5 seconds
(23:15:24) <MY PASSWORD HERE>
(23:15:25) /friendlyfire
(23:15:25) Friendly Fire is 0
(23:15:25) /bonus
(23:15:25) Current bonus frequency is 0
(23:15:25) /vote%
(23:15:25) Voting percent is 60
(23:15:25) /respawntime
(23:15:25) Respawn time is 3 seconds
(23:15:26) /maxrespawntime
(23:15:26) Maximum Respawn time is 5 seconds
(23:15:26) /nick PerroAZUL
(23:15:26) <[MAsAR] PerroAZUL> changed nick to <PerroAZUL>
(23:15:26) 2 admins connected:
(23:15:26) IP: *.*.*.* - Nick: <TiTi>
(23:15:26) IP: *.*.*.* - Nick: <PerroAZUL>
(23:15:42) 200.126.213.199:23073 requesting game...

Now this seems to happen EVERY time I press connect, at least this console output. I haven't bothered to reconfigure the second server so I can't tell if it gets all its info copied from the first server every time. I'm kinda sure it does.

The version of ARSSE is 1.2.9b (Build 21). It's the last you posted in this thread.

Also, this didn't happen some versions ago, don't remember which exactly. Anyway, I smell some problem with syncronization and threads.

Give me a minute and I'll post the config of ARSSE. Config attached.

[KeFear]

Okay. So you are using some sort of server side script? What is that /nick and /admins thing?
The other admin uses ARSSE too?
Try it when there are no other admins connected maybe.
I still couldn't reproduce this bug... if other admins connect, it is normal that you see all the /bonus etc. commands, as the other admin requests them on connect. ARSSE doesn't show you the server password in the console... so i think this is highly related to one of the server-scripts that you use.
Try it with other admin clients maybe.

What about the other thing, mixing the server configs?
Does it still happen? If does, could you test it when and how?

[urraka]

The server configs are still being mixed, but I just don't know in what situation. I've just found out something, though. The server password is outputed in the console when there are two tabs with the same server. You can test this yourself, just make two tabs with same IP and PORT. When you connect to the first server the password of the second one is shown in the console. It's like it tries to connect to both servers.
Anyway this doesn't explain why the server info was mixed.

That /nick and /admins thing yeah, it's server side script.

Also, this hasn't happened only to me, it has happened to every admin in our server. I've just seen it in the logs.

[KeFear]

Hmm, yes, it happens indeed. using two server tabs with same ip and port seems to cause the duplicated maxrespawn and other commands + the second tab's server password. I'll fix it as soon as possible.

The server mixing thing still needs some testings

EDIT
okay, the first issue is fixed
there is no update with it yet, but you can use the dev version from http://arsse.u13.net/ARSSE_dev.exe

[urraka]

Oh, that was fast
I'll be using that dev version. If I find out something I will let you know.

Date Posted: 06/05/2008 - 18:59:59Alright, today some bastard or hacker wannabe was trying to connect as an admin in our server, failing many times. That made me find out something about this bug we've been discussing about.

I have a script in ARSSE that pops an ADMINmsg in the OnAdminConnect event. The message showed even when the admin failed to connect (with wrong password), which I would call a bug also but I don't really care about that.

So the thing is, I have 2 server tabs. I'm connected on both. I set the first tab active and minimize ARSSE to the tray. Then the admin tried to connect to the server corresponding to the second tab. A message shows on the tray, I open ARSSE and it has the second tab active. The console part of the application is shown all in gray, like there was no console at all. The server parameters (ip, port, password) are still the parameters of tab 1.

So I guess that's the condition to make the parameters get mixed. It must be happening when someone types !admin in some server which isn't the corresponding to the active tab and ARSSE is minimized.

[SpiltCoffee]

For some reason, my Anti-Virus (McAfee) keeps detecting ARSSE as a trojan and deleting it. It's happened 5 times now. Any way to fix it (besides uninstalling either program)?

[Shoozza]

@PerroAZUL
I have worked on that issue it will be fixed in next build of arsse.

@SpiltCoffee
I could try to install McAfee and see but I need to know if the version I have is the same as yours. Also I would like to know what kind of trojan is says ARSSE is.

[Taz]

For some reason, my Anti-Virus (McAfee) keeps detecting ARSSE as a trojan and deleting it. It's happened 5 times now. Any way to fix it (besides uninstalling either program)?

get a better antivirus

[SpiltCoffee]

Detection Name: New Malware.gr (Trojan)

Please fix before it deletes it again... lol.

[Shoozza]

Which version of arsse do you use?
Did you try the dev version?

[nuclearrambo]

when i connect to IRC channel it begins to spam the channel with the text that appears in server window. e.g. the kill log, who joined the server. and all the shit. 

[CheeSeMan.]

im pretty sure thats what its suppose to do :p

[SpiltCoffee]

Which version of arsse do you use?
Did you try the dev version?

1.2.9b

Can't really be bothered using the Dev version, unless you want me to check something?

[Shoozza]

@SpiltCoffee
 what is the build number of that version?
@nuclearrambo
 You can filter out the stuff you don't want to see. Take a look at the OnData event file in the options.

[urraka]

It's because the default script sends everything to IRC. Just disable the OnData event... if you want the chat to be sent to IRC you should do it in the OnPlayerSpeak maybe. Something like,

Code: [Select]

IRCmsg <$PLAYER_NAME> $MESSAGE
Btw, I'm still waiting for some fix because I'm tired to reconfigure my servers all the time. So Shoozza, if you are in charge hurry your ass up!

[Shoozza]

@PerroAZUL
 Well you don't need to wait long. I just need to talk about something with KeFear then I can release the new version. If you are curious which bugs got fixed take a look at mantis

[nuclearrambo]

@SpiltCoffee
 what is the build number of that version?
@nuclearrambo
 You can filter out the stuff you don't want to see. Take a look at the OnData event file in the options.

k got it.

[SpiltCoffee]

@SpiltCoffee
 what is the build number of that version?
@nuclearrambo
 You can filter out the stuff you don't want to see. Take a look at the OnData event file in the options.

Build 17.